Terex Man Lifts Oklahoma

Terex Manlift Specifications
Based in Westport, Connecticut, Terex specializes in manufacturing construction machines. They manufacture equipment like manlifts, boom lifts and aerial lifts. These types of machines are designed to facilitate access to hard to reach areas, large equipment, buildings and roofs, amongst other things. A manlift, as defined by the U.S. Occupational Safety and Health Administration refers to a power-driven endless belt. This belt only moves in one direction and contains platforms, or steps or handholds which are attached to the unit in order to move workers from each floor.

TB85
Terex's TB85 man lift offers a max working height at 91 feet. The platform's max height reaches 85 feet, while the maximum width of the model is 8.5 feet. The TB85 has dimensions measuring 9 inches wide and 9 feet, 1-inch high by 36 feet. This particular model offers a reach of 70 feet. The TB85 has a boom angle below horizontal measures at -14 degrees and above horizontal reaching 75 degrees.

Terex TB100
The Terex TB100 man lift's maximum height is 106 feet and the platform's maximum height is 100 feet. The TB100 when stowed away, is around 9 feet high by 8.5 feet wide by 8 feet. The maximum width of the unit is 8 feet, 1 1/2 inches. The boom angle above horizontal is 75 degrees and below horizontal is 14 degrees. The horizontal reach measures at 67 feet, 4 inches.

TB110
The Terex TB110 man lift reaches a max height of 100 feet, while the max working height reaches 116 feet. The model is 8 feet wide x 9 feet, 4 inches high The TB110 offers a horizontal reach of 67 feet and a maximum width of 8 feet. This model has a boom angle of 75 degrees above horizontal plus ten degrees articulating. Below horizontal it is -14 degrees and it measures -105 degrees articulating.

• Combi Lift Multi Directional Forklifts Oklahoma
  The Combi-CB is a combination forklift and side-loader which is safe, effective, extremely manoeuvrable, and cost effective. This multi-directional, internal combustion engine powered, all-wheel drive forklift is the first of its kind. The Combi-CB is... More
• Nissan Stand Up Forklift Oklahoma
  It is really different to utilize a stand-up forklift as opposed to a sit-down model. The way you move and lift loads in addition to your movements are totally different. If you do not have... More
• Mitsubishi Counterbalance Forklifts Oklahoma
  Sadly, injuries and industrial accidents at construction locations are very common and occur more often than anybody would prefer. Based on statistics, a lot of these incidents occur because of wholly absent or inadequate protocols... More
• Fantuzzi Loaded Container Handlers Oklahoma
  Terex has engineered the Rubber Tired Gantry Cranes which deliver highly selective, container stacking and the ability for continuous operation at higher handling rates. Each and every unit has been engineered to deliver on the... More
• Taylor Used Forklifts Oklahoma
  Taylor Machine Works is a complete series of heavy duty forklift trucks, specialty machines, container handlers and equipment that continues to lead the industry because of their emphasis on consistency, support and ruggedness. For more... More