In the majority of situations, most individuals spend quite a bit of money purchasing their forklift. Thus, it is very essential to take good care of it in order to protect your investment well into the long run. It is really a good idea to know the procedures which are undertaken in the care and maintenance of this piece of equipment.
By starting up the forklift and listening carefully how it works is one of the best ways to tell how good the engine is performing. For instance, if there are any misses or knocks, the machine is defective and this should raise some concerns. What's more listen carefully for any squealing noise which come from the belts since these sounds will provide you with a wealth of information.
When carrying out maintenance, some of the main components you will need to pay attention to consist of the safety warning devices, horn, gauges, the overhead guard and the lights. Any burnt out light bulbs or faulty parts have to be replaced as soon as they are noticed. It is also essential to check the wiring.
When the above parts have been checked carefully, proceed to the battery compartment in order to see if the terminals are clean. If the terminals are not clean, be sure to clean them properly. Every cell of the battery should be inspected so as to ensure the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the equipment and then change the filters. The hydraulic filter, the transmission filter and the fuel filters must be frequently replaced. Prior to fitting them, be sure to write the date on the new filters by using a permanent marker in order to keep track.
After the oil change is carried out and the filters have been replaced, a visual inspection of the drive axle has to be carried out. If there is a grease fitting on the axle make certain to apply some grease. Inspect the engine belts for any frays or cracks. If you find any, fix the issue accordingly. After that, inspect every other component of the equipment like the wheels. If any kind of issue or fault is detected, be sure to deal with it immediately in order to make certain the machine is running at its safest and optimum levels.